End caps are used on the ends of corset boning.  

Click here for a tutorial on how to use spiral wire and end caps .

These end caps for corset boning are made from aluminium and are suitable for both continuous spiral steel boning and continuous flat steel boning which you cut to your own required lengths. 

Boning end caps come in five different sizes according to the corsetry boning you are using.  

These end packs are sold by wieght as follows:

4mm end caps - 3g = approx 50 metal end caps
5mm end caps - 5g = approx 50 metal end caps
7mm end caps - 10g = approx 50-60 metal end caps
9mm end caps - 12g = approx 50 metal end caps
11mm end caps -  5g = approx 20 large metal end caps *

Please choose which size you need from the options below.

If you order more than one pack in one size - ie: 4 packs of 7mm, these will be sent in ONE BAG.  Please check your order before letting us know that we only sent one pack. 

* in the event that your required size of end cap is out of stock, do not order a larger or smaller size than your boning as you will end up crying - end caps cannot be squeezed onto the wrong shaped boning.