7mm pre-cut spiral bones - REGULAR

Shop home > Spiral Steel Boning

7mm pre-cut spiral bones - REG
  • 7mm pre-cut spiral bones - REG
  • 7mm pre-cut spiral bones - REG
  • 7mm pre-cut spiral bones - REG
  • 7mm pre-cut spiral bones - REG

  • 7mm pre-cut spiral bones - REGULAR

  • 0.75mm thick, Regular weight
  • £0.27
Select 7mm regular spirals:

:  at  £0.27  each


Easy to use pre-cut spiral steel corset bones are 7mm wide and are standard weight corset boning for all corsetry applications including corsetted bodices and dress foundations.  Flexible and strong, they are pre-cut and pre-tipped for ease and speed.  Made in Europe.

Spiral wire corset boning is made from 2 springs, flattened and forced together which gives them strength whilst allowing them to flex in all directions.  This makes them very suitable for curvy areas of your corset, over the bust, hip and for extra curvy corsets.  

These pre-cut spiral wires are regular thickness and are suitable for all corset making including tight lacing corsets.

They fit beautifully into the 16mm tublar boning tape or can be used with the 15mm twill tape

  • Available in various lengths from 20cm - 31cm
  • 7mm x 0.75mm guage wire (regular weight)
  • Dry cleanable
  • Easy to use
  • European quality
  • Good for all corsetry applications

 

 

 

Recommend this to a friend  +

Recommend this to a friend